NEWS
Building A Brand With Strength
How much do you know about these issues in stainless steel processing?
Release time:
2024-03-27 09:06
Many stainless steel processing manufacturers now have the same feeling that stainless steel processing is quite difficult. But the reasons for this are nothing more than the following. Below, Heyi Stainless Steel will analyze it for everyone:
1. The machining hardness results in faster tool wear and difficulty in chip removal.
2. Low thermal conductivity causes plastic deformation of the cutting edge and faster tool wear.
3. The accumulation of chips can easily cause small pieces of powder to remain on the cutting edge of the pin, and cause poor machining surface.
4. The chemical relationship between the cutting tool and the processed material causes work hardening and low thermal conductivity of the processed material, which not only easily causes unusual wear, but also leads to tool breakage and abnormal fracture.
So, are there any ways to deal with these? Leyi Industrial Co., Ltd. reminds everyone to do the following and not worry:
A. Using tools with high thermal conductivity,
B. Sharp cutting edge line: The chip cutting groove has a wider edge band, which can reduce cutting pressure and effectively control chip removal.
C. Cutting conditions: Inappropriate machining conditions can reduce the service life of the tool.
D. Choose appropriate cutting tools: Stainless steel cutting tools should have high toughness, cutting edge strength, and coating film adhesion.
Recommended News
FOSHAN SHUNDE KANG DIAN METAL PRODUCTS CO. , LTD.
Phone：+86-18098181608(WhatsApp/WeChat)
Tel：+86-757-25520788
Fax：0757-25535109 / 25520766
Web：www.gdhongke.com
E-mail：gdhongke@gdhongke.com
Add：No.12 Guangming Middle Road, Leliu Street, Shunde District, Foshan City, Guangdong Province